The installation effect of solid wood flooring is related to the convenience of life in the future, so we must pay great attention to it. Understand the paving process of solid wood flooring: 1. Before paving the solid wood floor, because the wooden keel is easy to be affected by the tide insects, it should be sprinkled with some desiccant and insect-proof powder in the gap between the wooden keels, or you can sprinkle some eucalyptus blocks to prevent the wooden keel from getting wet and insects. . 2. Lay a moisture-proof film on the wooden keel. The junction between the moisture-proof films should overlap 50 mm and be taped to ensure the integrity and firmness of the moisture-proof film. In addition, the moisture-proof film should be rolled up to 50 mm at the corner of the four-wall wall. . 3. The installation floor should generally be installed from the front half of the door, so that the size of the floor is not neat at the end of the installation. When the floor needs to be cut to install, the other half of the house will usually be placed in various places. Furniture, so the uneven floor will also be blocked by the furniture, without affecting the overall beauty. 4. If the paving of the solid wood floor requires plywood as the cushion, the plywood should be sawed into small pieces of the size of 1.2 mm × 0.6 mm or 0.6 mm × 0.6 mm, and the small wooden blocks of these plywood are nailed with wooden keels. Fixed on the wooden keel, after all the ply mats have been laid, the level should be checked again according to the standard of ≤ 3 mm per 2 meters. 5. When paving the floor, use the electric drill to make the eye on the tongue of the floor, that is, the convex hole. The diameter of the eye should be slightly smaller than the diameter of the floor nail. Generally, the floor should be four eyes on the floor of 910 mm long. Screwed into the wooden keel from the eye. In order to ensure the beauty of the floor covering, it should be connected by mistake (the seam is more beautiful and firm than 30 cm). The length of the floor nail should be 2.5 times of the thickness of the floor. When it is fixed, the wooden keel is fixed by tilting from the angle of the eye into the angle of 30°-50°. 6. Because the wall surface of the owner's room sometimes appears to be not horizontal, and the row of wooden floors closest to the wall cannot be fixed by nailing, so it is necessary to place a large gap between the floor and the wall. Into the cork, use the cork to fix the floor and leveling, so that the floor pavement is more firm and beautiful. 7. If the construction volume of the pavement floor is too large, it cannot be completed in one day. The unpacked floor on the same day should be put back into the package to prevent the floor from getting wet. The installation of the baseboard: When the solid wood baseboard is installed, it is also necessary to insert a cork on the wall, and then use the nail to penetrate the baseboard and nail it into the cork, nailing a nail at intervals of 40 cm, in order to ensure the kick The appearance of the foot line, the selected nail should be studless, even if the nail with the head is used, the nail head should be cut and nailed before being nailed into the skirting line, and finally the nail hole should be made with the baseboard. Same color treatment to minimize construction marks. Thin Brass Padlock low prices, high quality, loved by people around the world.
Suitable suitcase, drawer, door locks and other places does not store valuables.
Material: Brass Lock body, cylinder, chrome plated shackle
Thin Type Brass Padlock,Thin Brass Lock,Gate Brass Padlock,Single Skin Brass Padlock Shengping Safety Protection Locks Manufacturer , https://www.chinajiuzhou.com
Purpose: lock boxes, cabinets, doors, etc.
Features lock all-copper, shackle sturdy rustproof