Cathode Copper,Copper Wire Cable,Copper Wire Scrap,Tin Plated Copper Wire Shandong Xinsuju Steel Co.,Ltd. , https://www.suscoil.com
1.1Â Environment Friendly:Using sunlight as light source, it has the characteristics of energy saving, environmental protection.
1.2 Long Lifespan:Work more than 3 years normally.
1.3Â Long Working Time:It can work 100~200 hours after fully charged under the standard light source.
1.4 Temperature range: -20 ºC~+70ºC.
1.5 Visibility:The intense brightness of the LED attract drivers' attention easily at the distance of 500m.
Â
2.Specifications
Name
Solar Road Studs
Material
Cast Aluminum, Plastic, Glass
Solar Panel
Voltage
2V/100-200mAH, 3.5V/78-120mAH and etc
Material
Monocrystalline silicon or polycrystalline silicon
Battery
Voltage
1.2V/600-800mAH, 2.4V/600mAH, 2.4/650mAH
Type
NI-MH, Li-Po, Super-capacitor
LED
1/ 2/ 3 lights per side
LED Color
White, Red, Yellow, Green, Blue or customized
Reflector Material
PMMA, PS
Working Model
Flash (2Hz±20%) or steady(constant)
Waterproof
IP68
Visibility
>500m
Anti-compression
20~30ton
3.Different Models of Our Solar Road Stud
3.1 Aluminum Solar Road Stud
Single side or double sides or more sides are available upon request about the solar road studs, and the number of lights of all our solar road studs can be customized.
Â
3.1.1 Model DSA-100 LED solar road stud
Size (L*W*H) : 132*123*22mm
Anchor: 51mm
Pressure resistance: 30ton
9.Installation Notes
6.1 Before installing the solar road studs, please put barriers around the construction, especially on the traffic roads.
6.2 Before installing the solar road studs, please clean road with a brush, to make the surface of road smooth, clean and dry.
6.3 If the solar road stud has the anchor, please drill a hole which is 1cm deeper and 2mm wider than its anchor.
6.4 When you install the solar road stud, please put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly.
6.5 On the highway, please install the solar road studs every 5 to 8 meters. On the ordinary roads, please install it every 3 to 5 meters.
6.6 After 2 hours of installation, you can check and fix solar road studs. After 4 hours of installation, the glue will dry completely.
10.About us
NANJING ROADSKY TRAFFIC FACILITY CO., LTD is a reputable and reliable manufacturer specialized in Road Studs and other road safety products for many years.
Our Road Studs have been exported to Middle & South America, Middle East, East Europe, Southeast Asia, Africa and etc.
Our products include plastic road studs,aluminum road studs, cat eye glass road studs, road delineator and etc.
1.Features
1.1Â Environment Friendly:Using sunlight as light source, it has the characteristics of energy saving, environmental protection.
1.2 Long Lifespan:Work more than 3 years normally.
1.3Â Long Working Time:It can work 100~200 hours after fully charged under the standard light source.
1.4 Temperature range: -20 ºC~+70ºC.
1.5 Visibility:The intense brightness of the LED attract drivers' attention easily at the distance of 500m.
Â
2.Specifications
Name
Solar Road Studs
Material
Cast Aluminum, Plastic, Glass
Solar Panel
Voltage
2V/100-200mAH, 3.5V/78-120mAH and etc
Material
Monocrystalline silicon or polycrystalline silicon
Battery
Voltage
1.2V/600-800mAH, 2.4V/600mAH, 2.4/650mAH
Type
NI-MH, Li-Po, Super-capacitor
LED
1/ 2/ 3 lights per side
LED Color
White, Red, Yellow, Green, Blue or customized
Reflector Material
PMMA, PS
Working Model
Flash (2Hz±20%) or steady(constant)
Waterproof
IP68
Visibility
>500m
Anti-compression
20~30ton
3.Different Models of Our Solar Road Stud
3.1 Aluminum Solar Road Stud
Single side or double sides or more sides are available upon request about the solar road studs, and the number of lights of all our solar road studs can be customized.
Â
3.1.1 Model DSA-100 LED solar road stud
Size (L*W*H) : 132*123*22mm
Anchor: 51mm
Pressure resistance: 30ton
9.Installation Notes
6.1 Before installing the solar road studs, please put barriers around the construction, especially on the traffic roads.
6.2 Before installing the solar road studs, please clean road with a brush, to make the surface of road smooth, clean and dry.
6.3 If the solar road stud has the anchor, please drill a hole which is 1cm deeper and 2mm wider than its anchor.
6.4 When you install the solar road stud, please put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly.
6.5 On the highway, please install the solar road studs every 5 to 8 meters. On the ordinary roads, please install it every 3 to 5 meters.
6.6 After 2 hours of installation, you can check and fix solar road studs. After 4 hours of installation, the glue will dry completely.
10.About us
NANJING ROADSKY TRAFFIC FACILITY CO., LTD is a reputable and reliable manufacturer specialized in Road Studs and other road safety products for many years.
Our Road Studs have been exported to Middle & South America, Middle East, East Europe, Southeast Asia, Africa and etc.
Our products include plastic road studs,aluminum road studs, cat eye glass road studs, road delineator and etc.
Model NO.: ROADSKY
Battery: 1.2V, 650mAh Anti-High(Low) Temperature Ni-MH
Working Modes: Flash (2Hz±20%)or Steady(Constant)
LED Colour: White/Red/Yellow/Green/Blue or Customized
LED: Super Bright, Anti-Fog LED Lens, Dia 5mm
Waterproof: IP68
Opening Light Intensity: Front Lighting <500lux
Visibility: >800m
Pressure Resistance: >20ton/30ton(in Static)
Trademark: ROADSKY
Transport Package: Cartons for LED Solar Road Stud
Origin: Mainland China
HS Code: 94056000
Model NO.: ROADSKY
Battery: 1.2V, 650mAh Anti-High(Low) Temperature Ni-MH
Working Modes: Flash (2Hz±20%)or Steady(Constant)
LED Colour: White/Red/Yellow/Green/Blue or Customized
LED: Super Bright, Anti-Fog LED Lens, Dia 5mm
Waterproof: IP68
Opening Light Intensity: Front Lighting <500lux
Visibility: >800m
Pressure Resistance: >20ton/30ton(in Static)
Trademark: ROADSKY
Transport Package: Cartons for LED Solar Road Stud
Origin: Mainland China
HS Code: 94056000
1.Features