Known as China's "father of materials" Shi Changxu still did not forget to make suggestions in the hospital, adding "new materials special". Previously, the two major projects he had suggested have been included in the national major science and technology projects.

Shi Changxu was awarded the highest scientific and technological technology in the country in 2010, and has participated in or presided over the formulation of China's national science and technology development plans for metallurgical materials, materials science and new materials; presided over national key laboratories, national engineering research centers and national major scientific projects. Project and evaluation work. Although it is over 90 years old, it is still active in the forefront of materials.

“Material Industry and Environmental Protection Seminar” was held in Beijing a few days ago. Shi Changxu, a senior academician of the two institutes, was unable to attend due to physical reasons. However, he wrote a written speech during the hospital stay in Beijing Hospital. “At present, reducing energy consumption and pollution is ours. "Material workers face the heavy responsibility." He said, "I propose to include relevant scientific and technical issues and upgrading of enterprise process equipment into the "new materials special" and give strong support."

However, the new material is a major special project, but there is no news. In the "Material Industry and Environmental Protection Seminar", the Chinese Academy of Engineering academician Tu Hailing explained that because the material industry is relatively special, the actual material products are relatively vague, so the relevant indicators are difficult to estimate. In addition, the new material specialization and other technology plans are suspected of cross-over and repeated deployment.

"Materials are the foundation of manufacturing, which determines the wealth and poverty of the whole country. The dream of a strong country is indispensable." In March last year, Shi Changxu said in his report on the road to the realization of the Chinese dream.

“Strongly promote the implementation of major tasks such as major national special science projects (not only national major science and technology projects), and strive to achieve leapfrog development in key areas and strategic industries.” On January 9, 2014, the National Science and Technology Work Conference was held in Beijing. Advancing the implementation of major national science and technology projects is one of the top 10 key tasks of China's Ministry of Science and Technology at the meeting.

The national major science and technology project is to achieve the national goal, through the core technological breakthroughs and resource integration, the major strategic products, key common technologies and major projects completed within a certain time limit are the top priority of China's science and technology development.

According to public information, there are 16 major national science and technology projects, the implementation time is 2006-2020, each investment is tens of billions of yuan, and 13 have been officially announced, respectively, nuclear high-base special, integrated circuit equipment special, mobile Specialized for broadband communication, special oil and gas development for CNC machine tools, special water pollution control for large nuclear power plants, special project for special genetically modified drugs, special for infectious disease prevention, special for large aircraft, special for high-altitude manned spaceflight and lunar exploration project.

However, the number of major national science and technology projects is not static, and the words of Academician Shi Changxu are highly valued by Chinese national leaders.

On June 11, 2012, Premier Wen Jiabao of the State Council at the academician meeting of the two academies, he clearly pointed out that "of course, science and technology are constantly developing, the situation is constantly changing, and major special projects cannot be static. For example, major projects of aero-engines and gas turbines are Later, it was recommended by Mr. Shi Changxu."

According to the Economic Information Daily reported on June 4, 2013, it was learned from authoritative sources that the National Major Science and Technology Special Office recently launched a special demonstration of key new materials, plus the newly launched aero-engine and gas turbine and shale gas projects. It is argued that the national major science and technology projects are expected to increase to 20, driving related investment or reaching 100 billion yuan.

On July 15 of the same year, the Great Wisdom News Agency learned from the Ministry of Industry and Information Technology and the National Development and Reform Commission that the special major materials newly launched by the National Major Science and Technology Special Office recently added special arguments and have been approved by the State Council.

It is worth noting that at the end of 2009, the establishment of strategic emerging industries has just started. The areas initially identified at the time included seven major industries such as “new materials”. Although some industries have been continuously adjusted, the new materials industry is stable.

The “Navigation” target of the seven major industrial strategic emerging industries such as “New Materials” in the next five years will be officially confirmed on May 30, 2012. On the same day, Premier Wen Jiabao of the State Council hosted a standing meeting to discuss and adopt the “12th Five-Year National Strategic Emerging Industry Development Plan”, which proposed energy conservation and environmental protection, new generation information technology, biology, high-end equipment manufacturing, new energy, and new materials. The key development directions and main tasks of seven strategic emerging industries such as new energy vehicles, and proposed 20 projects.

At the 2014 National Science and Technology Work Conference, Wan Gang revealed that a key task of this year's scientific and technological work is to implement the research projects and fund management reform opinions, and make overall planning and classification guidance. Major projects must highlight national goals and basic frontier projects should highlight innovation. Leading and public welfare projects should focus on major needs and market-oriented projects should highlight the main body of the enterprise.

**background**

New materials cover a wide range of fields, generally referred to as new materials with excellent performance and special functions, or materials with improved performance and new functions after the improvement of traditional materials, including new functional materials, high-performance structural materials and advanced composite materials. Its scope is constantly changing with economic development, scientific and technological progress, and industrial upgrading.

It mainly includes the following six areas: special metal functional materials. A metal material with unique acoustic, optical, electrical, thermal, magnetic properties. High-end metal construction materials. Metal material with higher strength, toughness and high temperature resistance and corrosion resistance than traditional metal structural materials. Advanced polymer materials. Synthetic polymer new materials with relatively unique physicochemical properties, suitable for use in special fields or specific environments. New inorganic non-metallic materials. Newly available materials based on traditional inorganic non-metallic materials with special properties such as abrasion resistance, corrosion resistance and photoelectricity. High performance composites. A new type of material with special functions and structures composed of two or more kinds of heterogeneous, heterogeneous, and heterogeneous materials (one as a matrix and others as reinforcements). Frontier new materials. At present, based on basic research, the future market has broad prospects, representing the development direction of new materials and technology, and has important leading materials.

CPF-D series ClO2 generator is flow rate control on-site generating system. It can add clo2 aqueous directly to water pipe with simple, safe, reliable, stable operation. It can adjust the dosage of clo2 aqueous through receiving 4-20mA signal provided by the flow rate sensor. The way of clo2 producing: 5NaClO2+4HCl = 4ClO2+5NaCl+2H2O. Technology: Use sodium chlorite and hydrochloric acid as raw materials, transmission of raw materials through two metering pumps to the reactor, produce the concentration of more than 95% of high-purity chlorine dioxide solution added to water for disinfection. It can automatically adjust the dosage of clo2 solution through flow control and residual chlorine display system. When lack of raw materials, the liquid level alarm system will give audible and visible alarm signals and automatically cut off the power supply of equipment. The entire control system use PLC as the core, on-site parameters setting through the touch screen and remote control through the computer, to realize high-performance automated management of Disinfection System. Raw materials conversion rate is more than 95%.

*Related Products:chlorine dioxide sterilizer generation system,chlorine dioxide chemcial generator,medical waste Chlorine Dioxide Generator.

Standard Chlorine Dioxide Generator

Chlorine Dioxide Generation System, Disinfection System, Chlorine Dioxide Disinfection

Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. , http://www.watermanclo2.com

Posted on