Matters needing attention when using acrylic saw blades. Analysis of matters needing attention when using acrylic saw blades.
Chain Link Fence is made from galvanized or PVC coated iron wire, to fix with posts, brace and fittings to build a chain link fence system in the park, tennis court, airport and other places.The fence is made of woven steel wire, which is one of the most commonly used and versatile of all the fencing fabrics. It is normally available in a variety of wire gauges and mesh sizes to suit individual applications. All chain link rolls come complete with line wires and with knuckled edges. Widely used in highway, railway, highway and other fence facilities. Also used for interior decoration, raising chickens, ducks, geese, rabbits and zoo fence. Fence of mechanical equipment, mechanical equipment of the transmission network. Sports venues fence, the road greening fence.
basic requirements
1. Select the appropriate blade according to the design requirements of the device.
2. The equipment should be equipped with safety protection devices such as protective cover, power brake, overload protection and so on.
3. Have professional operators install and use, wear labor clothing, wear protective glasses, earmuffs, etc.
4. Operators should not wear gloves, long hair should be placed in the work cap, and tie and cuffs should be noted to prevent danger.
5. Keep away from fire and humid environments.
Installation requirements
1. The equipment is in good condition, the main shaft has no deformation, no trailing jump, the installation is fixed firmly, no vibration, etc.
2. Check the saw blade for damage, whether the tooth shape is complete, whether the saw plate is smooth and clean, and whether there are Other abnormalities to ensure safe use. 3. When assembling, make sure that the arrow direction of the saw blade is consistent with the direction of rotation of the device spindle.
4. When installing the saw blade, keep the shaft center, the chuck and the flange clean. The inner diameter of the flange is the same as the inner diameter of the saw blade. Make sure that the flange is tightly combined with the saw blade, install the positioning pin and tighten the nut. The size of the flange should be appropriate and the outer diameter should be no less than 1/3 of the diameter of the saw blade.
5. Before the equipment is started, ensure that the equipment is operated by a single person, jog and idling, check whether the equipment is turning correctly, whether there is vibration, and the saw blade is idling for a few minutes after being installed, without normal operation after slipping, swinging or jumping. .
Requirements
1. When working, the workpiece should be fixed, the profile positioning should conform to the direction of the knife, so as to avoid abnormal cutting, do not apply side pressure or curve cutting, the feed should be smooth, avoid the blade impact contact with the workpiece, resulting in saw blade damage, or workpiece Flying out, an accident occurred.
2. When working, if the sound and vibration are abnormal, the cutting surface is rough, or the odor is generated, the operation must be terminated immediately, and the fault should be checked in time to eliminate the accident to avoid accidents.
3. When starting cutting and stopping cutting, do not feed the knife too fast to avoid broken teeth and damage.
4. If cutting aluminum alloy or other metal, use a special cooling lubricant to prevent the saw blade from overheating, causing paste, and other damage, which affects the cutting quality.
5. Equipment chip flute and slag suction device ensure smooth flow to prevent slag from forming into blocks, affecting production and safety.
6. When dry cutting, please do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; wet film cutting should be cut with water to prevent leakage.
Dongguan Yibao Knife Saw Factory specializes in the production and operation of various machine alloy saw blades, including plexiglass special saw blades, acrylic saw blades, solid wood cross-cut saw blades, aluminum saw blades, high-speed steel saw blades and so on. The company has more than 10,000 stocks for many years, complete specifications, quality assurance, price concessions!
Information Sources:
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Chain Link Fence
Chain Link Fence,Galvanized Chain Link Fence,Chain Link Fence For Sport Field,Chain Link Fence With Ground Screw Anchor
Hebei Giant Metal Technology Co., Ltd. , https://www.wiremesh.pl