NINGBO DURREX PUMPS CO.,LTD , https://www.durrexlobepump.com
PB-1 is used as a pure resin at the expense of metal, rubber and engineering polymers, it is also used synergistically as a blend component to improve and differentiate the properties of other polymers.
Properties of our PB-1:
Exterior-----------------------------------------------------------------------Ivory granules, grey and transparent
MFR (190ºC, 2.16kg)---------------------------------------------------------0.55~0.65 g/10min
Isotacticity----------------------------------------------------------------------------≥97.5%
Density------------------------------------------------------------------------0.9~0.93 g/m³
Melting Point-----------------------------------------------------------------------115~122 ºC
Tensile Strenght---------------------------------------------------------------------≥25 Mpa
Elongation at Break----------------------------------------------------------------------≥17%
Flexural Modulus--------------------------------------------------------------------≥500 Mpa
Notched IZOD Impact Strength at 23 ºC---------------------------------------------------≥25 kJ/m²
Shore Hardness (D)---------------------------------------------------------------------≥61 D
Crystallinity----------------------------------------------------------------------------≥60%
Oxidation Induction Time (220ºC)-------------------------------------------------------->30 min
Description:Â Perfect creep of resistance to heat and Environmental Stress-crack, Excellent wearability, High tenacity, Keeping a better strength under high temperature, A good reputation as plastic gold in world.
Applications:Â The main use of PB-1 is in flexible pressure piping systems for hot and cold drinking water distribution, preinsulated district heating networks and surface heating and cooling systems. ISO-15876 defines the performance requirements of PB-1 piping system. The most striking features are weldability, temperature resistance, flexibility and hydrostatic pressure resistance. The material can be classified PB125 with a minumum required strength (MRS) of 12.5Mpa. Other features include low noise tranmission, low linear thermal expansion, no corrosion and calcification.
Company Profile
As professional manufacturer of polyolefin, we, Shandong Orient Hongye Chemical Co., Ltd had been specialized in this industry for about 9 years from 2009 when it was registered with a capital of 164000000 CNY. We have 2 factories of polypropylene with granulation equipments of which the annual yield per line is about 180,000.00 metric tons. Besides, we have 2 polymerizing unit of polybutylene of the which the total output per year is 50,000 metric tons. Our products including PP homopolymer, PP random copolymer and polybutylene (PB-1), are all underwriting of CPIP.
Advantages
1. We are a company with LPG further processing unit from which some of stock can be acquired, that make our cost some low.
2. Located at the crucial node of the Blue Economy Zone of Shandong Peninsula, the High-end Industry Gathering Zone of Jaodong Peninsula and the High-efficiency Economy Zone of Huanghe Delta, we have the advantages of convenient transportation and conspicuous location policy.
3. We have our own patents of product design and processing.
4. The professional R/D advantages of our company from the cooperation with the major national experiment institute in rubber and plastic industry.
Â
Polybutylene (PB-1) is a polyolefin or saturated polymer that is expressed as CnH2n. PB-1 combines the typical properties of conventional polymer with some characteristics of technical polymers.
PB-1 is used as a pure resin at the expense of metal, rubber and engineering polymers, it is also used synergistically as a blend component to improve and differentiate the properties of other polymers.
Properties of our PB-1:
Exterior-----------------------------------------------------------------------Ivory granules, grey and transparent
MFR (190ºC, 2.16kg)---------------------------------------------------------0.55~0.65 g/10min
Isotacticity----------------------------------------------------------------------------≥97.5%
Density------------------------------------------------------------------------0.9~0.93 g/m³
Melting Point-----------------------------------------------------------------------115~122 ºC
Tensile Strenght---------------------------------------------------------------------≥25 Mpa
Elongation at Break----------------------------------------------------------------------≥17%
Flexural Modulus--------------------------------------------------------------------≥500 Mpa
Notched IZOD Impact Strength at 23 ºC---------------------------------------------------≥25 kJ/m²
Shore Hardness (D)---------------------------------------------------------------------≥61 D
Crystallinity----------------------------------------------------------------------------≥60%
Oxidation Induction Time (220ºC)-------------------------------------------------------->30 min
Description:Â Perfect creep of resistance to heat and Environmental Stress-crack, Excellent wearability, High tenacity, Keeping a better strength under high temperature, A good reputation as plastic gold in world.
Applications:Â The main use of PB-1 is in flexible pressure piping systems for hot and cold drinking water distribution, preinsulated district heating networks and surface heating and cooling systems. ISO-15876 defines the performance requirements of PB-1 piping system. The most striking features are weldability, temperature resistance, flexibility and hydrostatic pressure resistance. The material can be classified PB125 with a minumum required strength (MRS) of 12.5Mpa. Other features include low noise tranmission, low linear thermal expansion, no corrosion and calcification.
Company Profile
As professional manufacturer of polyolefin, we, Shandong Orient Hongye Chemical Co., Ltd had been specialized in this industry for about 9 years from 2009 when it was registered with a capital of 164000000 CNY. We have 2 factories of polypropylene with granulation equipments of which the annual yield per line is about 180,000.00 metric tons. Besides, we have 2 polymerizing unit of polybutylene of the which the total output per year is 50,000 metric tons. Our products including PP homopolymer, PP random copolymer and polybutylene (PB-1), are all underwriting of CPIP.
Advantages
1. We are a company with LPG further processing unit from which some of stock can be acquired, that make our cost some low.
2. Located at the crucial node of the Blue Economy Zone of Shandong Peninsula, the High-end Industry Gathering Zone of Jaodong Peninsula and the High-efficiency Economy Zone of Huanghe Delta, we have the advantages of convenient transportation and conspicuous location policy.
3. We have our own patents of product design and processing.
4. The professional R/D advantages of our company from the cooperation with the major national experiment institute in rubber and plastic industry.
Â
Model NO.: PB-1
Trademark: HY brand
Origin: Shandong China
HS Code: 3902900090
Model NO.: PB-1
Trademark: HY brand
Origin: Shandong China
HS Code: 3902900090
Polybutylene (PB-1) is a polyolefin or saturated polymer that is expressed as CnH2n. PB-1 combines the typical properties of conventional polymer with some characteristics of technical polymers.