Plate Cement Decorative Bathroom Waterproof Toilet Waterproof Price Overall Toilet Toilet Paper Holder,Toilet Roll Holder,Roll Paper Holder,Wall Mounted Paper Holder Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jenorsanitary.com
When installing, first apply a layer of clear cement slurry to the floor, then use the 1:2.5 cement mortar as the bottom layer, and compact and level it. Then pour the supernatant cement slurry to paste the stone. The thickness of the cement mortar base layer is preferably not less than 20 mm, and no person should walk or press heavy objects within 8 hours after laying the stone so as to avoid empty shell or unevenness. At the same time, it must be noted that some imported stone backs have a plastic network attached to them, and the sheet network must be torn off before installation.
It should be noted that although the bathroom floor and wall decoration materials can have a variety of materials, there is one prerequisite: waterproof. And you can't use sandstone stone, do not consider even if the surface waterproof.
After all the stone veneer sheets are fixed and fixed, they need to be repaired. Since the single stone veneer sheet always has flatness tolerances, the joints at the joints must have unevenness when they are combined into one plane. Therefore, the leveling of the joints is the installation. The indispensable link in the project. Another important task of the renovation is to remove various stains on the surface of the stone veneer, especially cement grout, which should be cleared away.
In the future use, the stone needs maintenance. The consumer usually waxes the surface of the stone to protect it, but when the wax is covered, the capillary pores on the stone surface will be blocked. During the secondary maintenance, the stone has been attached. The wax on the surface of the stone becomes an obstacle to the secondary protection of the wax from infiltrating into the interior of the stone. At this time, the cement or adhesive between the stone and the ground will slowly “invade†the body of the stone due to moisture or chemical reaction and cause stone anti-alkali. And stains and other lesions.
According to introduction, we should use professional curing agents to play a role in the conservation of stone. Curing agent has a very high infiltration, can penetrate 3 to 5 centimeters in the stone veneer, forming crystals to block the microscopic pores, thereby effectively protecting the internal quality of the stone.
Stones have naturally-occurring colors and textures, but they require anti-slip treatment before they are installed in the bathroom. The disadvantage is that the paving process requires high costs, and the quality determines the price.
Because the decorative stone is a natural product, the pattern and color characteristics of each plate will not be the same. It is necessary to achieve the overall color reconciliation through patterning (color) and gradually extending and transitioning the pattern and color. After the flowers (colors) are spelled out, they should be numbered immediately so that the numbers are in place when installed. The number can be marked with a paste or written directly on the board with a wooden crayon, but avoid using a liquid marker to mark the surface of the stone to prevent the colored liquid from penetrating into the stone, leaving traces that cannot be wiped off.