Model No.: HN-F001
Features:
1.Soft handle for better comfort.
2.Powerful heavy duty flux chipper
3.Ideal for all chipping operations including removal of slag, scale, welds and masonry
4.Easy to change the chip.
Specification:
Â
Item
Unit
HN-F001
Working pressure
psi(bar)
90(6.2bar)
Strokes per minute
cpm
2700
Chipper
mm
180
Air consumption of unit power
cfm
10
Air inlet
inch
1/4
Air hose
inch
3/8
N.W.
kg
2.2
Image Details:
Connectivity:
Air Supply & Pressure
• Always use a clean and dry air supply to operate the tool at 90psi.
• To ensure operating safety, performance and prevent damage to the tool do not operate exceed the maximum working air pressure.
Air Line
• Use a fitting air hose for connection between the compressor & tools.
• Ensure that the compressed air is cooled and its water content filtered and lubricated as required as shown in Fig 1 below.
• Excessive moisture levels can be compressed in the pipe and can permeate into tools & equipment resulting in mechanical failures and possible
injury.
Air Hose
• Ensure all hoses and fittings are clean and free of dust and debris before connecting any tools and equipment.
• Dust and debris can cause rust and malfunction in the tools and can result in dangerous operation.
Â
FAQ:
1.Q: Can you send us samples
A: We are pleased to send you the sample to test the quality and market.
2.Q: About your products, could you do it OEM?
 A: Yes, OEM is workable for us, but with MOQ.
3.Q: Have you guarantee for your products?
 A: Normally we provide half year guarantee with spare parts supply.
4.Q: Do you also provide spare parts of pneumatic tools?Â
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some vulnerable parts.
5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized but with MOQ.
6.Q: Can you inform us about the inner box?
A: We have 2 choices for inner box: ?neutral box(white-box & neutral color box) and customized color box with MOQ.
7.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.
8.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.
9.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
10.Q: How does your factory do regarding quality control?
A: HUNEER People always pay great attention to quality control from the very beginning, and every product was tested piece by piece before delivery.
Â
Model NO.: HN-F001
Condition: New
Customized: Customized
Stroke Per Minutes: 2700b.P.M
Chipper: 180mm
Consumption: 10cfm
Trademark: HUNEER
Transport Package: Carton Box
Origin: Zhejiang, China
HS Code: 84671100
Name: Air Flux Chipper & Air Hammer