8inch foaming PU emergency medical moving bed caster wheels. The fork is electroplated finish .with the features like anti-rust, anti-corrosion, rotation smoothly, anti-vibration. The wheel material is foaming PU, it a kind of plastic material which rotary quietness and anti-corrosion. It is very suitable for moving medical bed in hospital environment.
In order to use casters safety and extend the service life of casters, the Medical Casters maintenance job must to be done in the process of using. The usually maintenance methods are: Lubricate the axle and bearing; Clean the debris; Re-tighten the axle and any other adjustable accessory.
As for the quality of MYWIN casters, we provided the certification proof and have received testing after production. The regular salt and spray test and load capacity test are taken in our every caster. We also have the SGS, IAF, TUV and CNAS certification to make our customers more confident about our products.
Emergency Moving Bed Casters, Foaming Pu Medical Caster Wheels, Hospital Bed Caster Wheels Ningbo Mywin Caster Co., Ltd. , http://www.mywin-caster.com
Introduction of resin arts mold making silicone rubber:
Resin arts mold making silicone rubber is a kind of liquid fluid, features good fluidity and good operation., large duplication times
Features of resin arts mold making silicone rubber:
1. Good characteristics of easy-operation
2. Ligh viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. High temperature resistance, acid and alkali-resistance and ageing resistance
Operations of resin arts mold making silicone rubber:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause, and no more further steps will be available
Step Three: Perfusion Molding of gifts mold making of silicone rubber
The perfusion molding is an easy way to make molds, it's Slowly and evenly perfuse the mixed silicon rubber into the square frame. After the cross linking reaction.
Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should Polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
Item No.
RTV2020
Color
white
Viscosity
22000 cps
Hardness
20 shore A
Mix ratio
100:2
Pot life
30-40 mins
Curing time
4-6 hrs
Tensile strength
 3.8 Mpa
Tear strength
 25 N/mm
Elongation
550%
Shrinkage
0.3%
Introduction of resin arts mold making silicone rubber:
Resin arts mold making silicone rubber is a kind of liquid fluid, features good fluidity and good operation., large duplication times
Features of resin arts mold making silicone rubber:
1. Good characteristics of easy-operation
2. Ligh viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. High temperature resistance, acid and alkali-resistance and ageing resistance
Operations of resin arts mold making silicone rubber:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause, and no more further steps will be available
Step Three: Perfusion Molding of gifts mold making of silicone rubber
The perfusion molding is an easy way to make molds, it's Slowly and evenly perfuse the mixed silicon rubber into the square frame. After the cross linking reaction.
Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should Polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
Item No.
RTV2020
Color
white
Viscosity
22000 cps
Hardness
20 shore A
Mix ratio
100:2
Pot life
30-40 mins
Curing time
4-6 hrs
Tensile strength
 3.8 Mpa
Tear strength
 25 N/mm
Elongation
550%
Shrinkage
0.3%
Model NO.: RTV2020
HS Code: 39100000
Model NO.: RTV2020
HS Code: 39100000
Resin arts mold making silicone rubber