In the renovation, the installation of the toilet is very critical, and the acceptance is also very particular. It is not only necessary to look at the final result. During the installation process, workers must be allowed to perform the construction according to the specifications, so as to avoid hidden dangers in the future life. What are the installation specifications? (1) Take out the blockage of the ground water outlet, ... 80 after the small couple marriage room petty bourgeoisie wedding mood fashion embodiment · A product member exclusive cash discount · Mediterranean style blue + white · mosaic even for the home art young hot MOM 50,000 to create a two-tiered shop cash discount coupons to warm this winter is not afraid of cold · small apartment mix and match the new fashion trend · 200,000 luxury to create 95 flat space · Dulux paint cost-effective large PK · TV wall small space large content

In the renovation, the installation of the toilet is very critical, and the acceptance is also very particular. It is not only necessary to look at the final result. During the installation process, workers must be allowed to perform the construction according to the specifications, so as to avoid hidden dangers in the future life. What are the installation specifications?

(1) Take out the pipe plug of the ground water outlet, and check that there is no debris in the pipe. Clean the area around the nozzle.

(2) Align the outlet pipe of the toilet with the outlet pipe, place it flat, and draw a mark on the hole of the toilet bolt and remove the toilet.

(3) Insert a hole with a diameter of 20 mm and a depth of 60 mm at the imprint, insert a 10 mm diameter bolt into the hole, secure it with cement, align the eye of the toilet with the bolt, align it with the mark, and after the test, The toilet was removed. Put putty around the outlet of the toilet bowl and the nozzle of the water pipe, and then align the four bolt holes of the toilet with the bolt, lay it flat and align it. Put a rubber pad on the bolt and screw it on until the nut is tight.

(4) Align the back center of the toilet and draw a vertical line. Draw a horizontal line at a height of 800 mm from the ground. Draw a seal on the horizontal line according to the positions of the two side holes on the back of the tank. Play a diameter of 30 mm at the hole. 70 mm hole. Insert a bolt 10 mm in diameter and 100 mm in length into the hole and secure it with cement. Hang the back water tank on the bolt and align it with the center of the toilet. Specially align with the center of the toilet bowl. Place a good rubber pad on the bolt, screw on the nut, and tighten it until it is tight.

Entrance decoration restaurant decoration space cement TV decoration home apartment decoration decoration style fashion small apartment decoration home

Polypropylene Woven Butyl Rubber Tape

Polypropylene Woven Butyl Rubber Tape,Butyl Tape ,Butyl Caulk ,Butyl Sealant

Plastic Strap & Tape Co., Ltd. , http://www.nbwraptapes.com

Posted on