[tips] some precautions for insulating shoes

1. Insulated shoes are suitable for use as auxiliary safety equipment and labor protection equipment when working on electrical equipment with AC 50Hz, 1000V or less and DC 1500V or less. Workers use insulated shoes that can be used with basic appliances to reach live parts and can be used to protect against clicks caused by step voltage. Step voltage refers to: when the electrical equipment is grounded, it is between the two points of maximum ground potential gradient of 0.8M. Potential difference.

2. The product should not be exposed to dampness and should not be used after being exposed to dampness. Once damp, it should be naturally air-dried in a cool, ventilated and ventilated place to avoid damage to the shoes. After the sole is pierced by a foreign body, it cannot be used as an insulating shoe.

Third, pay attention to the maintenance of leather shoes, ground shoe polish. The wiping method is: First wipe the dust on the surface of the shoes with a clean soft cloth, then squeeze the shoe oil on the cloth evenly and coat it on the upper, and wipe it after a while (shoe polish is slightly dry).

Four. Insulation shoes should not be worn in the rain, but should not be washed, otherwise prone to breakage, degumming, bleaching, pan-salt cream and other phenomena.

5. Insulation shoes must not be in contact with oils, acids, alkalis, and sharp substances to prevent corrosion, deformation, and damage.

Six. Color leather shoes (including white) should be particularly careful in wearing, can not run into sewage, dirt, tea stains, cola, etc., otherwise it will leave stains, so that the original color of leather shoes damaged.

7. The appearance of slight folds, slight deformations, etc. is a normal phenomenon.

8. Insulated shoes are prone to pan-salt cream when they are exposed to moisture or sweat. If there is a pan-salt frost phenomenon, use a small amount of warm water with gauze or cotton, wipe the white salt cream on the upper, put the shoes in a ventilated place to dry, then rub with a shoe polish, and repeat several times to restore the original state. So keep shoes dry.

Nine. Insulation shoes should be kept clean, dry, and good shoe polish, natural flat: After storage for a period of time (especially the rainy season) should always make the shoes cool and dry ventilation, and wipe the shoe polish to prevent mold.