Black Bond Tile,Bond For Tile,Black Base Tile Shandong Yahong New Materials Technology Co., Ltd , https://www.okrooftile.com
5.2*5.2 copper head tact switch
5.2*5.2 patch tact switch
Mini Tact Switch Series:
3X3X1.5 , 3X3X2.0 , small tortoise tact switch, medium tortoise tact switch, big tortoise tact switch
4.5X4.5 Plug-in Tact Switch Series - Handle Height H=3.8 , 4.8 , 5.0 , 6.0 , 7.0mm
4.5X4.5 SMD Tact Switch Series - Handle Height H=3.8 , 4.8 , 5.0 , 6.0 , 7.0mm
4.5X4.5 Edge Triangle Tact Switch Series - Handle Height H=3.8 , 4.8 , 5.0 , 6.0 , 7.0mm
3X6 Tact Switch Series - Handle Height H=2.5 , 2.6 rocker switch
http://
4X4 Tact Switch Series : 4X4X1.5, 4X4X1.6, 4X4X1.7
Note: Available in copper or white plastic heads for customer choice.
5.2*5.2*1.5 tact switch, 5.2*5.2*1.6 waterproof tact switch, 5.2*5.2*1.7 patch tact switch, 5.2*5.2*1.8 copper head tact switch
5.2x5.2x1.5 waterproof tact switch, 5.2x5.2x1.6 patch tact switch, 5.2x5.2x1.7 tact switch, 5.2x5.2x1.8 copper head tact switch
http:/ /
TS-030 copper head tact switch, TC-4411 patch tact switch - precision lathe parts
http://
4*4*1.5 tact switch/ 4*4* 1.7 copper head tact switch/ 4*4* 1.6 waterproof tact switch
4x4x1.5 copper head tact switch, 4x4x1.6 patch tact switch, 4x4x1.7 waterproof tact switch
dIP switch http://
Specification: 1 , RATING ( amount) set Value ) : DC12V 50mA 2 , contact resistance; 100mΩ MAX.30 milliohms or less.
3 , insulation resistance: 100MΩ MIN.100 megohms or more.
4 , withstand voltage: input AC 500V (50-60Hz) voltage , 1 minute sensitivity current is 0.5mA, according to the following
  Contact method test : (1) between the feet that are not in contact . (2) Between the foot and the outer casing . There is no abnormality such as insulation damage . 5 . key force Degree: 250gf±50gf 6 , Solderability test: The top of the terminal is immersed in a soldering bath 2mm deep, the temperature is 260±5 °C , and the time is 3±0.5 seconds. The welding area should be more than 75% .
7. Resistance to soldering heat test: temperature when soldering oven controlled at 260 ± 5 ℃, through The furnace time is 3±0.5 seconds , and the ( substrate ) thickness is 1.6mm. The hand soldering method is 320±5 °C for 3±0.5 seconds. The body has no deformation and can satisfy the mechanical and electrical properties.
8, life test: no load: the combination of standard Plug (near as possible to the center) over 1 minute at a speed of 15 to 18, carried out 100,000 times
Pulling 9 , heat resistance test: placed in the temperature of 85 ± 2 ° C for 96 hours , then placed normally   It was measured at room temperature for 1 hour. No abnormal appearance , satisfied with mechanical and electrical properties.
10 , cold resistance test: placed in the temperature -25 ± 3 °C for 48 hours , then placed at room temperature and humidity Determined in 1 hour. No abnormal appearance , satisfied with mechanical and electrical properties.
11. Moisture test: Place 40±2 °C . The relative humidity is 90~96% in Hr environment for 48 hours , then test the sample in normal environment for 1 hour. No abnormal appearance , satisfied with mechanical and electrical performance
12 , test standard status: test temperature, humidity and air pressure without specifying : (1) temperature is 5~35 °C . (2) humidity is 45%~85% (3) The air pressure is 86Kpa~106Kpa.13 , the operating temperature range: use within the temperature range of -10 °C ~ +60 ° C.
4*4*1.5/4*4*1.7/5.2*5.2 tact switch waterproof call us. Dongguan Zhenxin Electronics Co., Ltd. 0769-82011159
5.2*5.2*1.6 copper head tact switch
5.2*5.2*1.7 patch tact switch
EVA pad
http://
5.2*5.2*1.6 copper head tact switch
5.2*5.2*1.7 patch tact switch
