For Catalyst and Auxiliary series, we can supply many kinds of Catalyst and Auxiliary with good quality, such as Initiator , Solvent , Dispersant, Emulsifier, Inhibitor , Regulator , Terminator, and so on.
We have our own production factories and lab. We can develop new product according to customer`s require, because we cooperate with several university, please believe that we have research advantage. Our factory is in chemical industry park, gets produce license from government, can supply product steadily.
Catalyst and Auxiliary Catalyst, Initiator, Solvent, Dispersant, Emulsifier, Inhibitor, Regulator, Terminator Jinan Yudong Technology Co., Ltd. , http://www.yudongchemical.com
1.Simple Introduction of pvc resin
Polyvinyl Resin(PVC resin)Â is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resin is in white powder . They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
2.PVC Resin Date sheet
Item
SG1
SG2
SG3
SG4
SG5
SG6
SG7
SG8
K Value
77-75
74-73
72-71
70-69
68-66
65-63
62-60
59-55
Viscosity,ml/g
156-144
143-136
135-127
126-119
118-107
106-96
95-87
86-73
Number of impurity particle
30max
30max
30max
30max
30max
30max
40max
40max
volatiles content%,
0.4max
0.4max
0.4max
0.4max
0.4max
0.4max
0.4max
0.4max
Apparent density, g/ml
0.42min
0.42min
0.42min
0.42min
0.42min
0.42min
0.45min
0.45min
Number of grain/400cm 2
40max
40max
40max
40max
40max
40max
40max
40max
whiteness
74%min
74%min
74%min
74%min
74%min
74%min
70%min
70%min
Plasticizer absorbency value of 100g resin
25
25
25
22
19
16
14
14
Residual chlore thylene content, mg/kg
5max
5max
5max
5max
5max
5max
5max
5max
3.PVC resin Application
PVC Resin SG1--mainly used in producing high-grade electrical insulating material.Â
PVC Resin SG2--mainly used in producing electrical insulating material, common soft products and film.
PVC Resin SG3--mainly used in producing electrical insulating materials, agricultural film, daily-use plastic products.
PVC Resin SG4--mainly used in producing membranelle for industrial and civil use, tube and pipes .
PVC Resin SG5--mainly used in producing transparent products section bar, hard tube and decorative materials .
PVC Resin SG6--mainly used in producing clear foil, hard board and welding rod .
PVC Resin SG7 and SG8--mainly used in producing clear foil, hard injection molding.
4.Packing and Loading quantity of pvc resin
(1) Packing: 25kg net / pp bag , or kraft bag .
(2) Loading quantity :680Bags/20'container , 17MT/20'container.
(3) Loadint quantity : 1000Bags/40'container, 25MT/40'container.
1.Simple Introduction of pvc resin
Polyvinyl Resin(PVC resin)Â is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resin is in white powder . They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
2.PVC Resin Date sheet
Item
SG1
SG2
SG3
SG4
SG5
SG6
SG7
SG8
K Value
77-75
74-73
72-71
70-69
68-66
65-63
62-60
59-55
Viscosity,ml/g
156-144
143-136
135-127
126-119
118-107
106-96
95-87
86-73
Number of impurity particle
30max
30max
30max
30max
30max
30max
40max
40max
volatiles content%,
0.4max
0.4max
0.4max
0.4max
0.4max
0.4max
0.4max
0.4max
Apparent density, g/ml
0.42min
0.42min
0.42min
0.42min
0.42min
0.42min
0.45min
0.45min
Number of grain/400cm 2
40max
40max
40max
40max
40max
40max
40max
40max
whiteness
74%min
74%min
74%min
74%min
74%min
74%min
70%min
70%min
Plasticizer absorbency value of 100g resin
25
25
25
22
19
16
14
14
Residual chlore thylene content, mg/kg
5max
5max
5max
5max
5max
5max
5max
5max
3.PVC resin Application
PVC Resin SG1--mainly used in producing high-grade electrical insulating material.Â
PVC Resin SG2--mainly used in producing electrical insulating material, common soft products and film.
PVC Resin SG3--mainly used in producing electrical insulating materials, agricultural film, daily-use plastic products.
PVC Resin SG4--mainly used in producing membranelle for industrial and civil use, tube and pipes .
PVC Resin SG5--mainly used in producing transparent products section bar, hard tube and decorative materials .
PVC Resin SG6--mainly used in producing clear foil, hard board and welding rod .
PVC Resin SG7 and SG8--mainly used in producing clear foil, hard injection molding.
4.Packing and Loading quantity of pvc resin
(1) Packing: 25kg net / pp bag , or kraft bag .
(2) Loading quantity :680Bags/20'container , 17MT/20'container.
(3) Loadint quantity : 1000Bags/40'container, 25MT/40'container.
Model NO.: pvc resin sg5
Appearance: Powder
CAS No.: 9002-86-2
Volatiles Content: 0.40max
Number of Grain/400cm 2: 40max
Residual Chlore Thylene Content: 5 Mg/Kg Max
Loading Quantity: 17mt/20′container
Loading Port: China Main Port
Trademark: Kelai
Transport Package: 25kg/Bag
Specification: pvc resin
Origin: China Mainland
HS Code: 3904109001
Model NO.: pvc resin sg5
Appearance: Powder
CAS No.: 9002-86-2
Volatiles Content: 0.40max
Number of Grain/400cm 2: 40max
Residual Chlore Thylene Content: 5 Mg/Kg Max
Loading Quantity: 17mt/20′container
Loading Port: China Main Port
Trademark: Kelai
Transport Package: 25kg/Bag
Specification: pvc resin
Origin: China Mainland
HS Code: 3904109001
China factory pvc resin SG3, SG5, SG8, K71, K67, K57
China factory pvc resin SG3, SG5, SG8, K71, K67, K57