*Material performance superiority . *Material performance superiority .
Wing Nuts are a kind of fastener nuts . The raw material is carbon steel or stainless steel(304/316). They have two hollow wings and it mainly used with the screws .
It has a hold in the center and two projecting parts and that you can screw onto a bolt by using your fingers.
This kind of nuts made by stamping.And they can also made according to customers special request.
Hebei Xinyu Metal Products Co.,Ltd is a ISO9001 cerificated enterprise,which specialize in
Wing Nuts Wing Nuts,Stamped Wing Nuts,Stampings Steel Wing Nuts,Full Thread Wing Nuts,Carbon Steel Stamping Wing Nuts Hebei Xinyu Metal Products Co.,Ltd , http://www.t-nuts.net
The stainless steel press M-profile fittings are manufactured and tested according to (DIN) DVGW W534-1995,materials are available to stainless steel 304L ,stainless steel 316L and galvanized carbon steel .the press fitting sizes from 15mm up to 108mm with EPDM and FKM O-Ring  which can be used a wide range of application ,like Drinking water ,Heating ,
Cooling Water,Building ,Chemical and so on .
TECHNICAL DATAÂ
Â
Products name
pipe fitting stainless SS316 press fit bend 90 degree with Wall Plate
Material
stainless steel 304L,316L,
Size
 OD12mm up to OD108mm
Thickness
1.5-2.0MM
Standard of  Press fittingsÂ
 (DIN)DVGW W534-1995; (JIS)JWWA G116:2001; GB/T 19228.1-2003Â
O-Ring
Chlorinated butyl rubber(CIIR), EPDM, HNBR, NBR and FKM, etc.
working temperatureÂ
 -15°C to 110°C,
 working pressureÂ
1.6MPaÂ
Anneal
all stainless steel pipe fittings are annealed in inert gases before packing.
End connection
 press fittings
Terms of payment
30% TT deposit, the balance is paid before shipping the goods
Certificate
CE,ISO,SGS
Delivery time
About 7-20 days
SIZE DATA OF PRESS fittings ELBOW 90 DEGREES WITH WALL PLATE 
Â
OD(mm)Â Â
  L (mm)     Â
        Z (mm) Â
 L1(mm)   Â
  T1 (mm)Â
15XR1/2
46
21
30
1.5
18XR1/2
48
21
30
1.5
22XR1/2
49
21
30
1.5
22XR3/4
57.5
29.5
36
1.5
*Basic Principle Of Stainless Steel Press Profile fittings.
1,Principle of leak-proof and sealing :the stainless steel press type fitting is filled with O-ring seals in a radial contraction,which is leaky and water-stopping, instead of leak-stopping.
2,Principle of resistant extraction :The middle position of the stainless steel press type fitting is small, but the two ends  are large, and the pullout is >3.0mpa.
3,Principle of anti-rotation :the stainless steel press fitting and tube are pressed into a hexagon and cannot be rotated.
Preview Press fittings stainless steel 
O-Ring EPDM and FKMÂ Â
 Â
The EPDM O-Ring is tasteless non-toxic,also it has excellent antioxidant, , heat and cold resistance, ageing resistance, It can be used for long time in normal working temperature  is -20° degree to 110° degree .
Most of the FKM O-Ring is used at at high temperature working environment ,for heat , steam ,working temperature  is -20° degree to 205° degree .
Advantages of Stainless Steel Press FittingsÂ
*Advantages of environmental protection
*The superiority of connection technology
*The superiority of appearance
*Cost-effective superiority
*Quick connection and safe installations
*Remarkable corrosion resistance
*Superior crush resistance
Contact Us
Mr.Peter
Â
 Mobile:+86-13777772065
 Website:http://chinapressfittings.com
Â
Address:No. 2869, YongQing Avenue, ShaCheng Street, Economic And Technological Development Zone ,ZheJiang Province,China
Related Products
M Profile Press fittings  and V profile press fit fittings
M type press fit fititngs ,Propress fit Coupling ,press fit Equal coupling,press fit Reducing coupling, press fit adaptor with female threaded end,press fit adaptor with male threaded end, press fit coupling with threaded end ;press fit 90 degree bend & elbow ,press fit 90 degree bend with female threaded end, press fit 90 degree bend with male threaded end,reducing elbow,press fit 90 degree bend with plain end, press fit 45 degree elbow with screw end;Â
V type press fittings ,propress fittings Tee ,propress fittings  equal tee with female threaded end,propress fittings  equal tee with male threaded end,propress fittings  press reducing tee, propress fittings flanged adator press fittings.propress fittings  press short elbow ,propress fittings  press pipe fittings , propress fittings  press pipe tube ,propress fittings  custom made press fittings.
Â
The stainless steel press M-profile fittings are manufactured and tested according to (DIN) DVGW W534-1995,materials are available to stainless steel 304L ,stainless steel 316L and galvanized carbon steel .the press fitting sizes from 15mm up to 108mm with EPDM and FKM O-Ring  which can be used a wide range of application ,like Drinking water ,Heating ,
Cooling Water,Building ,Chemical and so on .
TECHNICAL DATAÂ
Â
Products name
pipe fitting stainless SS316 press fit bend 90 degree with Wall Plate
Material
stainless steel 304L,316L,
Size
 OD12mm up to OD108mm
Thickness
1.5-2.0MM
Standard of  Press fittingsÂ
 (DIN)DVGW W534-1995; (JIS)JWWA G116:2001; GB/T 19228.1-2003Â
O-Ring
Chlorinated butyl rubber(CIIR), EPDM, HNBR, NBR and FKM, etc.
working temperatureÂ
 -15°C to 110°C,
 working pressureÂ
1.6MPaÂ
Anneal
all stainless steel pipe fittings are annealed in inert gases before packing.
End connection
 press fittings
Terms of payment
30% TT deposit, the balance is paid before shipping the goods
Certificate
CE,ISO,SGS
Delivery time
About 7-20 days
SIZE DATA OF PRESS fittings ELBOW 90 DEGREES WITH WALL PLATE
Â
OD(mm)Â Â
  L (mm)     Â
        Z (mm) Â
 L1(mm)   Â
  T1 (mm)Â
15XR1/2
46
21
30
1.5
18XR1/2
48
21
30
1.5
22XR1/2
49
21
30
1.5
22XR3/4
57.5
29.5
36
1.5
*Basic Principle Of Stainless Steel Press Profile fittings.
1,Principle of leak-proof and sealing :the stainless steel press type fitting is filled with O-ring seals in a radial contraction,which is leaky and water-stopping, instead of leak-stopping.
2,Principle of resistant extraction :The middle position of the stainless steel press type fitting is small, but the two ends  are large, and the pullout is >3.0mpa.
3,Principle of anti-rotation :the stainless steel press fitting and tube are pressed into a hexagon and cannot be rotated.
Preview Press fittings stainless steelÂ
O-Ring EPDM and FKMÂ Â
 Â
The EPDM O-Ring is tasteless non-toxic,also it has excellent antioxidant, , heat and cold resistance, ageing resistance, It can be used for long time in normal working temperature  is -20° degree to 110° degree .
Most of the FKM O-Ring is used at at high temperature working environment ,for heat , steam ,working temperature  is -20° degree to 205° degree .
Advantages of Stainless Steel Press FittingsÂ
*Advantages of environmental protection
*The superiority of connection technology
*The superiority of appearance
*Cost-effective superiority
*Quick connection and safe installations
*Remarkable corrosion resistance
*Superior crush resistance
Contact Us
Mr.Peter
Â
 Mobile:+86-13777772065
 Website:http://chinapressfittings.com
Â
Address:No. 2869, YongQing Avenue, ShaCheng Street, Economic And Technological Development Zone ,ZheJiang Province,China
Related Products
M Profile Press fittings  and V profile press fit fittings
M type press fit fititngs ,Propress fit Coupling ,press fit Equal coupling,press fit Reducing coupling, press fit adaptor with female threaded end,press fit adaptor with male threaded end, press fit coupling with threaded end ;press fit 90 degree bend & elbow ,press fit 90 degree bend with female threaded end, press fit 90 degree bend with male threaded end,reducing elbow,press fit 90 degree bend with plain end, press fit 45 degree elbow with screw end;Â
V type press fittings ,propress fittings Tee ,propress fittings  equal tee with female threaded end,propress fittings  equal tee with male threaded end,propress fittings  press reducing tee, propress fittings flanged adator press fittings.propress fittings  press short elbow ,propress fittings  press pipe fittings , propress fittings  press pipe tube ,propress fittings  custom made press fittings.
Â
manufacturing and exporting Furniture Nuts .Product including
Wing Nuts, Hopper Feed T Nuts , Propeller Nuts , Weld Nuts , Pallet Nuts , Locking Nuts , Rivet Nuts , Doggie Tooth Washers , Steel Stamped Parts , Hopper Feed Rivet T Nuts , Metal Stamped Parts ,
T-Nuts For Cliff-Climbing,Furniture Nuts, Tee Nut For Rock Climbing holding, Insert Tee Nut ,Middle steel Zinc Plated Stamping Wing Nut, Auto Flat Plane Weld Nuts ,
Automobile Spot Welding Nut,Customer-Made Metal Stamping Parts, Cold Heading Tee Nuts ,Stainless Steel Butterfly Nuts, Furniture Eccentric Wheel , Cam Lock Furniture Nut .
Our key strength are custom made special fasteners according to drawing or sample .We have longer and stable business relationship with well-known companies from American, Poland,Germany,French and so on.In the future ,xinyu will continue focusing on innovation special designed products,becoming your most trusted partner.
Technics: Casting
Certification: DIN, JIS, GB, SGS
Color: Stainless Steel
Size: 12mm up 108mm
End Connection: Press Fittings
Custom: Accept
Samples: Free
Delivery Time: 7-130days
Pressure: Pn16
O-Ring: EPDM/FKM
Packing: Carton and Wooden Case
Payment: T/T
Trademark: JK
Transport Package: Carton and Wooden Case
Specification: water
Origin: China
HS Code: 7307290
Technics: Casting
Certification: DIN, JIS, GB, SGS
Color: Stainless Steel
Size: 12mm up 108mm
End Connection: Press Fittings
Custom: Accept
Samples: Free
Delivery Time: 7-130days
Pressure: Pn16
O-Ring: EPDM/FKM
Packing: Carton and Wooden Case
Payment: T/T
Trademark: JK
Transport Package: Carton and Wooden Case
Specification: water
Origin: China
HS Code: 7307290