Home>Bearing knowledge>Bearing professor helps you analyze the causes and disposal methods of bearing overheating
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Bearing professor helps you analyze the causes and disposal methods of bearing overheating

Source: China Bearing Network Time: 2013-12-07

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The professor gave us a description of the causes and disposal methods of bearing overheating from seven aspects.
Reasons for motor bearing overheating and disposal methods:
1, the bearing is damaged. Should be replaced.
2. The rolling bearing grease is too little, too much or has iron scraps and other impurities. The bearing grease capacity should not exceed 70% of the total volume; those with impurities should be replaced.
3. The shaft and the bearing cooperate too tightly or too loosely. When it is too tight, it should be ground from the head; when it is too loose, it should be set to the shaft.
4. The bearing and the end cap cooperate too tightly or too loosely. The bearing chamber is processed when it is too tight; when it is too loose, the steel sleeve is set in the end cover.
5. The two caps or bearing caps of the motor are not properly installed. Install the end cap or bearing cap into the flat; tighten the screws.
6. The belt is too tight or the coupling is not properly installed. Adjust the belt tension; proofread the coupling.
7, the sliding bearing lubricant is too little, there are impurities or oil ring stuck. Should be refueling, new oil; repair or replace the oil ring.
Recommend to friends comments close window

Bearing related knowledge
The use of imported bearings in the common sense of work and work and the use of technical energy-saving heat treatment skills and equipment in the bearing profession (3)
Skf bearing angle touch ball bearing imported bearing division method Professor's trick: the layout and characteristics of spherical roller bearings


This article links to http://
Please indicate the bearing network http://

Previous:Pre-disposal method for rusting of FAG bearing outer surface Next:Differential depiction of adjustable clearance rolling ball bearing (1)

We are a professional manufacturer of  Deco Nailer.
Deco Nailer are characterized by:
● Ideal tool for sofa making.

● Different size of nose can be offered to you.

● lightweight, flexible operation.

● it drives deco nails head diameter from 10mm to 25mm, drives on by one.

● Easy-molded rubber handle and ergonomic gun body design operation.

DHAOO TOOLS  CO.,Ltd

 

Deco Nailer

Deco Nailer,Deco Air Nailer,Industrial Deco Nailer,Peneumatic Deco Nailer

DAHOO Tools Co., Ltd. , http://www.dahootools.com

Posted on