Aluminum Oxide Flap Disc is generally used for polishing wood and metal and can also used in industrial production. The grit of aluminum oxide Flap Disc is from 36# to 120# and the base is the X-Wt Cloth. The advantage of flap disc is it has low noise.
If you have any questions, please contact with us directly. The Abrasive Cloth are produced with high quality and good appearance. Welcome you can visit our factory for inquiry. Please send mail directly to us.
Aluminum Oxide Flap Disc Aluminum Oxide Flap Disc,Aluminium Oxide Abrasive Flap Disc,Surface Grinding Wheel Flap Disc,Machine Use Flap Disc Jiangsu Fengmang Compound Material Science & Tech Group CO.,LTD , http://www.fmabrasive.com
Engraving and milling machine is an important part of the tool, is the core accessories, with a knife to carving, but for different materials need to use different tools, a machine tool is a waste of resources, so in the carving and milling center must The tool magazine and pneumatic lock spindle are installed, and the automatic tool changing and tool setting can be performed according to the program during the execution of the machining program. The main technologies used in the automatic tool changer are the high speed CNC system and the high position loop gain, thus ensuring the processing. The accuracy of contours at high and low speeds is consistent.
Let's talk about how to choose the correct tool:
1. High-density board and solid wood are recommended to use rib milling cutters;
2. It is recommended to use round-bottom carving knife for precision small-scale relief processing;
3, need to process the product on the surface without burrs and will not be rocker, can use the next knife;
4, roughing particleboard, etc. recommend the use of multi-striped milling cutter;
5, aluminum plate cutting recommended single-blade special aluminum milling cutter;
6. Single-edged spiral ball end mills are recommended for the processing of cork, density board, raw wood and PVC;
7. It is recommended to use double-edge straight groove milling cutters for multi-layer and plywood processing;
8. It is recommended to use double-edged and large-flux spiral milling cutters for cutting the MDF.
9, Acrylic mirror carving processing recommended use of diamond carving knife;
10. Single-edged spiral milling cutter is recommended for acrylic cutting.
Source high speed CNC engraving and milling machine Article-43398/ 