Safety Net Inspection Instrument Usage Precautions

The safety net detection instrument is mainly used to detect the performance of the safety net. Which safety nets should be paid attention to during the use of the instrument?
I. Operation precautions of ZW-732 safety net impact tester:
1. The test bench must be fixed firmly. A soft sand test pit must be placed below the test ball.
2. For the sake of safety, the test ball is lifted and the operator is prohibited from standing under the test ball.
3. During the test, please don't let casual people wait and watch around the test stand.
Second, ZW-733 safety net penetration test machine operation precautions:
1. To prevent accidents, it is forbidden to reach under the test stick during the test.
2. After the test sticks are sucked in, the non-relevant experimental operators should be kept away from the equipment to prevent accidents.
Third, ZW-736 safety net ultraviolet pretreatment box operation precautions:
1. During the test, it is strictly prohibited to shake the cabinet, otherwise it is explosive.
2. Do not place the instrument in a wet environment.
3. At any time, it is forbidden to touch the high pressure xenon lamp directly by hand.
4, the operator should have protective clothing, protective gloves, so as not to be hand stabbed or burned.
5. Note that when placing the sample, do not touch the high pressure lamp. The high pressure lamp is a fragile glass product.
6. During the test, the cabinet shall be placed flat so that the neon lamp is in a vertical state during normal operation, otherwise the lifetime of the neon lamp will be shortened.
7. Before each time you turn on the Xenon lamp, you should check whether the cooling fan is working normally (the wind is blown out from the outlet under the Xenon lamp). It is forbidden to turn on the Xenon lamp when the cooling fan is not working (for example, it is broken)!
8, the instrument must have a good grounding!
Fourth, ZF-621 safety net flame tester operating precautions:
1. Instruments and gas cylinders must be strictly prohibited from smoldering, eliminating fires, and extinguishing the smouldering specimens after the test. Carbon dioxide and other fire fighting equipment should be installed.
2、Before starting the machine, you must carefully check the gas line and strictly prohibit gas leaks.
3. Operators should wear protective clothing and protective gloves to prevent their hands from being stabbed or burned.
4. The test is best conducted in a fume hood to prepare for immediate removal of harmful gases and replacement of fresh air.
5. At the end of the test, the gas source should be turned off and the gas should be turned off before shutting off the power.
6. The instrument is equipped with a gas alarm device, such as a gas alarm, so check for leaks.
7. Immediately after the alarm of the gas alarm, turn off the power supply and gas source. Wait until the fault is rectified before starting up again.
8, the instrument must have a good grounding!

This website solemnly declares: This article is the reprint of the online media, only represents the author's point of view, has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.