ICESUN Vacuum Glass LTD. adopts the unique vacuum eye technology to produce Gen3 vacuum glass with mirror eye. This mirror eye technology refers to place the nano active sodium barium film with the size of pupil in the vacuum chamber. When it encounters trace gas, the eye of vacuum glass would immediately undergo chemical reaction and change from black and bright mirror into white powder. The disappearance of the mirror eye indicates the increase of conduction and convection in the vacuum glass, and also indicates that the Low-E film will soon be oxidized and fail, and the radiation heat transfer would greatly increase. That is to say, the building glass will fail. Therefore, users can easily know the service life of their own windows at any time through installing our Vacuum Glass For Buildings. Besides, our company also provide other good quality and high performance Vacuum Glass For Transportation like cars, Vacuum Glass For Passive House, Vacuum Glass For Sun Room and skylight, etc.
Vacuum Glass With Mirror Eye,Low-E Vacuum Glass With Mirror Eye,Insulated Glass With Vacuum Eye,Vacuum Glass With Visible Mirror Eye ICESUN VACUUM GLASS LTD. , https://www.icesunvacuumglass.com
1. The paper tube must be aligned, not one side long and one side short. The standard for whitening on both sides of the stretched film is about 1 cm.
2. Minimize the wrinkles on the surface of both ends and the white pressed lines in the middle (this will seriously affect the aesthetics).
3, no black impurities, the die should be washed clean, can not be burnt plastic into the plastic, if the naked eye can be found must be immediately cleared.
4, when packing, pay attention to the protection edge, do not collide, resulting in quality problems caused by edge rupture, can not have burrs.
5, when the material is broken, it must be cut and tidy. If the cut is uneven, it cannot be shipped as a finished product. Including the goods must be rolled up at both ends, not more than there.
Jiuzhi Plastics Network 