In recent years, more and more buildings have chosen light-weight walls as k>k> partitions. Compared with the load-bearing wall, the lightweight wall has many advantages such as energy saving, convenient construction, and reduced building stress. However, it also has disadvantages such as poor bearing capacity, poor sound insulation effect, and easy wall cracking. The decoration process is really sloppy. .

Poor load-bearing capacity is fixed on the floor.

At present, the industry is not conclusive about the weight of light-weight walls, but the light-weight wall bearing capacity has been widely recognized, so consumers should minimize the suspension of heavy objects on light walls. In layman's terms, items that weigh more than one hand are best not to hang on a light wall.

It is generally believed that cabinets are also best not to hang on light-weight walls, but for light-weight walls that have been tiled, because cement can enhance the load-bearing capacity of the wall, the cabinet can be hung on the wall even without special treatment. . However, for the sake of insurance, it is best to deal with the wall. The method of treatment is to first affix a layer of steel mesh on the wall, then smooth it with cement mortar, and finally seal it with gypsum board. However, the safest method is to use a special hanger to secure the cabinet to the floor.

The weight of the electric water heater will increase greatly after the water is stored. Therefore, although the bathroom is covered with ceramic tiles, the wall bearing capacity has been increased, and the electric water heater is not suspended on the light body wall.

Wall easy to crack wallpaper to reduce the chance of cracking

Due to the different materials of the light wall and the plaster layer, the two are difficult to combine well, which is likely to cause cracking of the wall. For example, some light-weight walls are made of a perforated plate of straw material, so it is difficult to combine with cement mortar and the possibility of cracking on the wall is very high.

In order to reduce the possibility of cracking the wall surface, the wall surface of the light body wall can be applied and then painted, but if the room is too dry, the cloth may be cracked, so the patch is not completely Ensure that the wall does not crack. The best way to prevent cracking of the wall is to affix the wallpaper. Compared to wall paint, wallpaper is more flexible.

Sound insulation is poor, the wall should be soundproofed

Because the light-weight wall is thin and the sound insulation effect is not good, it is necessary to sound-proof the light-weight wall with poor sound insulation effect. Sound insulation of the lightweight wall does not affect the next step of the wall. Experts can put the rubber and plastic board on the wall first, then hit the keel about 2 cm thick, stuff it into the keel space with polystyrene board or rock wool, and finally seal it with gypsum board. If the wall is made slightly convex and concave, the sound insulation effect will be better.

If there are more light-weight walls in the room, the sound insulation of all light-weight walls will increase the expenditure. The owners may consider only sound-damping the light-weight walls of the main noise sources.

【hint】

1. The kitchen and bathroom walls should be made of floor pillows. If you want to add a light-weight wall as a partition in the kitchen or bathroom, you should first make a 150-200 mm high floor pillow with concrete on the wall of the light-weight wall. This not only increases the bearing capacity at the bottom of the wall, but also prevents the new wall from damaging the floor.

2. After removing the partition wall between the two rooms, it is easy to make the height difference between the walls on both sides of the broken wall more obvious, so the top of the wall should be “flattened”.

In kidney disease, blood levels of Phosphate may rise (called hyperphosphatemia) leading to bone problems. Calcium Acetate binds phosphate in the diet to lower blood phosphate levels.
Calcium Acetate is used as a food additive, as a stabilizer, buffer and sequestrant, mainly in candy products under the number E263.
Tofu is traditionally obtained by coagulating soy milk with calcium Sulfate. Calcium acetate has been found to be a better alternative; being soluble, it requires less skill and a smaller amount.
Calcium acetate was once a common starting material for the synthesis of acetone before the development.
A saturated solution of calcium acetate in alcohol forms a semisolid, flammable gel that is much like "canned heat" products such as Sterno. 

Calcium Acetate

Calcium Acetate,Calcium Acetate Food Ingredient C4H6CaO4,Calcium Acetic Acid Salt 62-54-4,E263 Calcium Acetate Food Additive

Jiangsu Kolod Food Ingredients Co., Ltd. , http://www.kolodchem.com

Posted on