As the name suggests, flame cutting machines are cut by oxyacetylene or oxyfuel. Flame Cutting Machine Flame Cutting Machine,Cnc Machine,Cnc Plasma Table,Air Plasma Cutting Machine Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnformingmachine.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>The fundamentals of bearing scale selection The basis of bearing scale selection
In the selection of the bearing scale; can be based on the effect of the load on the bearing and the demand for the life and reliability of the job; to determine the required bearing with the additional load of the bearing. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Usually the product list of each brand of bearing will list the fundamental additional dynamic load C and the fundamental additional static load C0. The conditions of the bearing static load and dynamic load need to be checked independently. The static load not only refers to the effect of the bearing at the stop or very low speed. The load should also be checked for the static load safety factor under heavy impact load. When viewing the dynamic load, the load spectrum with the most realistic conditions should be used for checking; including the maximum load that can be presented.
Recommend to friends comments close window Bearing related knowledge How to improve the accuracy of INA bearings?
Ultra high precision angular touch ball bearing features
The use of SKF bearings in the medical field
KOYO bearing rolling bearing common problems and answers to the cylindrical hole bearing device tips
This article links to http://
Please indicate the bearing network http://
Previous:The calculation method of bearing life number is as follows: the abnormal sound detection of bearing
1. CNC Flame Cutting Machine is the earliest and best CNC cutting equipment. Flame Cutting Machine is mainly used in heavy industries with low precision requirements, such as sheet metal, steel structure, shipbuilding, machinery and construction.
2. The flame cutting machine is suitable for the cutting of carbon steel plates of 5mm or more.
3. Economical and practical.
Source: China Bearing Network Time: 2017-12-29