A hydraulic gauge adaptor is a device used to connect a hydraulic gauge to a hydraulic system. It is typically a small, threaded component that acts as an interface between the gauge and the hydraulic system. Gauge Adaptor,Oil Gauge Adapter,Hydraulic Gauge Adapter,Oil Pressure Gauge Adapter Yantai Dongyue Hydraulic Technology Co., Ltd , https://www.deeleap.com
The adaptor is designed to fit into the hydraulic system's pressure port or test point, allowing the gauge to be securely attached. It ensures a tight seal to prevent any leakage or loss of pressure during testing or monitoring.
Hydraulic gauge adaptors come in various sizes and configurations to accommodate different types of hydraulic systems and gauges. They are often made of durable materials such as stainless steel or brass to withstand the high pressures and harsh conditions commonly found in hydraulic systems.
Overall, a hydraulic gauge adaptor is an essential tool for accurately measuring and monitoring hydraulic pressure in various applications, such as industrial machinery, automotive systems, and hydraulic equipment.
The helmet UV aging chamber is primarily used for the pre-treatment of helmets before conducting UV aging tests. It simulates long-term exposure to ultraviolet light, allowing users to evaluate how the helmet's performance might be affected after such exposure. This equipment plays a crucial role in ensuring that safety helmets meet required standards under real-world conditions.
**Safety Helmet UV Aging Chamber Operating Instructions**
*Article by the Technical Department of Qingdao Zhongbang Instrument Co., Ltd.*
*Official Website: [www.qingdaozhongbang.com](http://www.qingdaozhongbang.com) | Technical Support: +86-400-XXX-XXXX*
---
### **1. Purpose of the Helmet UV Aging Chamber**
The helmet UV aging chamber is designed to simulate the effects of prolonged UV exposure on safety helmets prior to testing. This helps manufacturers and researchers assess the durability, structural integrity, and protective capabilities of helmets after being subjected to natural sunlight over time.
---
### **2. Safety Operating Guidelines**
1. Operators must read the user manual carefully and understand the basic functions and operation of the chamber.
2. Before turning on the device, ensure that the grounding wire is properly connected to prevent electrical hazards.
3. Always wear protective clothing and gloves during operation to avoid injuries from sharp edges or heat.
4. Avoid placing the chamber in humid environments to prevent damage to internal components.
5. Never touch the high-voltage xenon lamp directly with your hands.
6. To extend the life of the xenon lamp, place the chamber on a flat surface so that the lamp remains vertical during operation.
7. Do not turn on the xenon lamp if the cooling fan is not functioning. Always check that the fan is working correctly (air should be blowing out from the bottom of the lamp).
8. Avoid shaking the chamber during testing, as this could cause the lamp to explode.
---
### **3. Key Features of the Helmet UV Aging Chamber**
1. Equipped with a 450W short-pulse high-pressure xenon lamp, which meets strict industry standards.
2. Includes an efficient cooling system to prevent overheating and potential explosions.
3. Temperature accuracy is ±0.2%, and time accuracy is within 1 minute.
4. High-quality power supply and trigger components are used to ensure stable performance and long-lasting results.
5. Features automatic shut-off when the xenon lamp is turned off.
6. Constructed with high-quality cold-rolled steel for the control box and stainless steel test chamber to resist corrosion.
7. Uses high-precision stainless steel armored temperature sensors for accurate readings.
8. Can accommodate up to 14 helmets in one test cycle, improving efficiency.
9. Timing range: 0–999 hours; Power supply: AC 220V, 50Hz, 800W.
---
### **4. Pre-Test Preparation**
1. Prepare the helmet samples for testing.
2. Clean the helmet’s surface and remove any internal padding or straps.
3. Install the xenon lamp according to the manufacturer’s instructions.
---
### **5. Step-by-Step Operation Guide**
1. **Install the Helmets**: Place 3 helmets on the top tray, 4 on the middle, and 3 on the bottom, ensuring no pressure is applied to the xenon lamp.
2. **Power On**: Connect the power supply and turn on the main and control switches. Ensure the cooling indicator light is on and the temperature reading is below 60°C.
3. **Start Illumination**: Press the “Illumination On†button to activate the UV light.
4. **Begin Timer**: Press the “Timer Start†button to begin the test. When the set time (400 hours) is reached, the timer will stop, and the UV light will turn off automatically.
5. **End Test**: After completion, remove the helmets, close the chamber door, and turn off the power.
---
### **6. Maintenance and Care**
1. Regularly inspect the equipment and its accessories to maintain their integrity.
2. Ensure all personnel are trained in the proper operation and maintenance procedures.
3. Keep the chamber clean and free from dust or debris.
4. If any issues arise, do not attempt repairs without professional guidance. Contact our technical support team for assistance.
---
This article is the original content of Qingdao Zhongbang Instrument Co., Ltd. For any reprints, please include the source. Unauthorized reproduction is prohibited.
*Source: [www.chinawj.com.cn](http://www.chinawj.com.cn)*
*Editor: Hardware Business Network Information Center*