A hydraulic gauge adaptor is a device used to connect a hydraulic gauge to a hydraulic system. It is typically a small, threaded component that acts as an interface between the gauge and the hydraulic system. Gauge Adaptor,Oil Gauge Adapter,Hydraulic Gauge Adapter,Oil Pressure Gauge Adapter Yantai Dongyue Hydraulic Technology Co., Ltd , https://www.deeleap.com
The adaptor is designed to fit into the hydraulic system's pressure port or test point, allowing the gauge to be securely attached. It ensures a tight seal to prevent any leakage or loss of pressure during testing or monitoring.
Hydraulic gauge adaptors come in various sizes and configurations to accommodate different types of hydraulic systems and gauges. They are often made of durable materials such as stainless steel or brass to withstand the high pressures and harsh conditions commonly found in hydraulic systems.
Overall, a hydraulic gauge adaptor is an essential tool for accurately measuring and monitoring hydraulic pressure in various applications, such as industrial machinery, automotive systems, and hydraulic equipment.
The UV aging chamber for safety helmets is primarily used to simulate long-term UV exposure on helmets before conducting safety tests. This process helps evaluate the performance and durability of the helmet after being exposed to ultraviolet radiation.
**Safety Helmet UV Aging Chamber Operating Instructions**
Article by the Technical Department of Qingdao Zhongbang Instrument Co., Ltd. For technical support, visit the official website or contact us via phone.
**1. Purpose of the Safety Helmet UV Aging Chamber**
The UV aging chamber is designed to pre-treat helmets for UV aging before testing. It mimics the effects of prolonged UV exposure, allowing manufacturers and testers to assess how the helmet’s materials and structure perform under such conditions.
**2. Operation Notes**
- Operators must read the user manual carefully and understand the basic functions and operation of the device.
- Before turning on the equipment, ensure that the grounding wire is properly connected to prevent any electrical hazards.
- Always wear protective clothing and gloves during operation to avoid injuries from sharp edges or heat.
- Avoid placing the device in a humid environment to prevent damage to internal components.
- Never touch the high-voltage xenon lamp directly with your hands.
- To extend the life of the xenon lamp, keep the chamber level so the lamp remains vertical during operation.
- Do not activate the xenon lamp if the cooling fan is not working. Check that the fan is running before starting the lamp.
- Do not shake the chamber during testing, as this can cause the lamp to break.
**3. Key Features of the UV Aging Chamber**
- Equipped with a 450W short-pulse high-pressure xenon lamp, strictly following industry standards.
- Includes an air-cooling system to prevent overheating and potential explosions.
- Offers precise temperature control (0.2% accuracy) and time measurement (1-minute accuracy).
- Uses high-quality power supply and trigger components to ensure reliable long-term operation.
- Features an automatic shut-off function when the xenon lamp turns off.
- Constructed with high-quality cold-rolled steel and stainless steel components to resist corrosion.
- Uses high-precision stainless steel thermocouples for accurate temperature readings.
- Designed to test up to 14 helmets at once, improving efficiency compared to standard requirements of 400 hours of UV exposure.
- Has a timer range of 0–999 hours and operates on AC 220V, 50Hz, 800W.
**4. Preparing for the Test**
- Prepare the helmet samples for testing.
- Clean the helmet surface and remove any internal padding or straps.
- Install the xenon lamp according to the manufacturer's instructions.
**5. How to Use the UV Aging Chamber**
- Place the helmets in three layers: 3 on top, 4 in the middle, 3 on the bottom, and 4 on the outer layer, totaling 14 helmets. Ensure no pressure is applied to the xenon lamp.
- Connect the power supply and turn on the main and control switches. The cooling indicator should light up, and the temperature display should show the actual chamber temperature (not exceeding 60°C).
- Press the "Illumination On" button to start the UV lamp. The status indicator will illuminate.
- Press "Timer Start" to begin the countdown. When the set time (400 hours) is reached, the timer will stop, and the UV lamp will automatically turn off.
- After the test, remove the helmets, close the door, and turn off the power.
**6. Maintenance Tips**
- Keep the equipment and all accessories in good condition. Perform regular maintenance and record all activities.
- Ensure operators are familiar with the equipment and its operating procedures. Maintain detailed technical records and keep the manual accessible.
- Keep the chamber clean and free of dust or debris.
- If any issues arise, do not attempt repairs yourself. Contact our technical support team for assistance.
This article is original content from Qingdao Zhongbang Instrument Co., Ltd. Reproduction requires proper attribution. For more information, visit [http://news.chinawj.com.cn](http://news.chinawj.com.cn).
Editor: Hardware Business Network Information Center | [http://news.chinawj.com.cn](http://news.chinawj.com.cn)