YJCB is a leading manufacturer specialized in providing Kitchen Gadgets in China. Food Gadgets,Small Kitchen Gadgets,Modern Kitchen Gadgets,Silicone Kitchen Gadgets Yangjiang YJCB Trade Co., Ltd , https://www.cbprokitchen.com
The push-pull meter is divided into pointer type and digital tension gauges, as well as external sensors and built-in sensors.
There are two types of push-pull force gauges: flat plate and cylinder. These two types have different appearances. The main range is selection. The range of push-pull force meter is 100g, 150g, 250g, 500g and so on. According to the approximate range measured, do not exceed its range, so it is easy to damage the push-pull meter. Should not be chosen too large, so that it is not easy to observe the readings and the accuracy is also low. When the push-pull force gauge is measuring, it is necessary to first observe whether the pointer is in the zero position, if not in the zero position, it should be adjusted to zero position. This is sometimes overlooked. It is often measured and the pointer is not at zero. The measured values ​​are all wrong. Also pay attention to the reading method when measuring. Eyes should be flat, do not squint, minimize reading errors. There are two main types of dynamometers, namely Grams and Newtons. Be careful not to confuse them. Analogical force gauges, domestically produced and foreign ones, are in fact similar, but they also differ in appearance, and their performance is similar. Can choose to make more economical and affordable, but the domestic is to choose a mid-range price, generally around 700 yuan, you can trust.
The use of digital push-pull force timing should pay attention to, before use, first check the battery voltage is normal, if under voltage, please charge in time, otherwise the measurement will appear deviation. To estimate the measurement size, select a suitable range of dynamometer and measure the out of range, which will cause the dynamometer sensor to be damaged. When the measured value is less than 3% of the measuring range, the accuracy will be deviated. When not in use for a long time, the dynamometer should be charged periodically. At the same time, when the weather is humid in the summer, it is necessary to pay attention to the environment of the instrument and avoid corrosion of the instrument.
Generally, when the torque exceeds 500N, the customer should consider selecting an external sensor tension meter. However, the 1000N also has a built-in sensor.
The use of push-pull gauge Note 1, the push-pull gauge cleaning should always keep the push-pull gauge clean, prevent water, dust, corrosive gases, etc. invade the machine, so as not to affect the normal operation of the push-pull gauge.
2. When the dirt or dust on the surface of the cleaning casing is stained, wipe it with a wrung damp cloth, and do not use a liquid or a spray cleaner to prevent corrosion of the casing surface and corrosion of the mechanical components in the inflow machine.
3, on the push-pull gauge shockproof Please put the machine in a stable place to prevent collisions, scratches or fall and cause damage.
4. For using the test environment, please use it in the specified ambient temperature (10°C ~ 40°C) and relative humidity less than 80%. There should be no vibration or other interference sources affecting the test results. Failure to do so may result in test results that do not meet the required level of accuracy or instrument failure.
5, on the storage and packaging box push pull force meter, should be placed in ventilated, dry, non-corrosive gas storage place, stacking height does not exceed ten layers, warehouse temperature (-20 ~ +50) °C, relative humidity is not greater than 90% .
6. The push-pull force meter that is used for transporting and packaging into boxes shall be transported by any means of transportation without the direct influence of rain, snow, and violent impact.
7. About Unexpected Failure When the following occurs, please delegate the maintenance work to the designated maintenance center:
1. Liquid intrudes into the machine;
2. When the instrument is exposed to rain or water;
3, in accordance with the instructions and can not work properly or test accuracy is not on time;
4, when the instrument is dropped or the fuselage is damaged;
5. When the instrument undergoes a significant change in performance.
Push-pull force meter can be divided into: hand-held push pull force meter | pointer push pull dynamometer | push pull force meter | portable push pull force meter | pointer push pull force meter principle | portable push pull dynamometer | pointer push pull force meter | digital push pull Force meter | digital push-pull dynamometer | digital push-pull gauge | push-pull dynamometer | Shanghai push-pull gauge price, push-pull gauge use in various industries â— fiber industry - applied to zipper pull, suit lining peel force , the stretching force of the fiber, the tear strength test of the nylon buckle, and the strength test of the buckle.
◠Pharmaceutical industry—opening force for capsule medicine, propulsive force of injection needle, hardness test of gel-like medicine, strength of test hair, pressure of test sprayer, tensile force of test paper diaper pleat, injection needle Thrust test, test to open the protective force of the vial protection cap, viscosity test test of the gel-like product.
â—Automotive industry—Applied to steering lamp operating levers, wiper levers, manual brakes, operating force of various buttons, operating force of door handles, switch force of doors, operating force of various pedals, switch of cover Force, shock absorber testing, braking and throttle testing, antenna adhesion, electrical system button testing, seat cushion testing, ventilation cap tension testing.
â— cosmetics industry - hair fracture force test, lipstick breaking test, makeup box switch force test, spray press test, etc. need to push the force meter test.
â— The food industry - used to test the hardness of jelly and the opening force of container lids, the test of bags and bags of puffed foods, the opening force of fast food bags, the presumption of the freshness of vegetables and fruits, the viscose strength, peeling Force, vertical pressure.
â—Electronic component manufacturing industry—Pressure applied to the shutter of a camera, insertion/extraction force of a connector, touch force of a keyboard, tensile destructive force of an electric wire and an optical fiber, peeling strength of a circuit board, the insertion/extraction force of a terminal product, etc. The welding strength of the parts â— The packaging industry - push-pull gauges are useful for measuring the strength, peel force, opening force, etc. of test tapes and films and packaging materials. Vertical pressure is of great use.
High quality with wide range of products, perfect for all of your cooking needs.
We have many different Food Gadgets , Small Kitchen Gadgets, Modern Kitchen Gadgets, Silicone Kitchen Gadgets.
100% food grade, useful and durable. Make your kitchen life more convenience.
Easy cleaning and maintenance, Can be used safely in the cooking.
We hope to cooperate with more customers for mutual development and benefits. Buyers are welcome to contact us!
Push force meter application and maintenance: