The research group led by Ren Tianling, a professor of microelectronics and electronics at Tsinghua University, recently produced a new type of luminescent material from two different forms of graphene. For the first time, it was demonstrated in a graphene-based light-emitting system that only one LED can be used for adjustment. Different colors of light cover almost all colors of the visible spectrum.

The color and wavelength of the light emitting diodes (LEDs) are determined by the luminescent material. Once the preparation is completed, the two properties are determined. So far, the idea of ​​using a single LED to change the color of a light is difficult to achieve. The color-tunable graphene LED developed by Ren Tianling's research team covers red light from a wavelength of 450 nanometers to a wavelength of 750 nanometers, except for dark blue and violet.

The key material for realizing adjustable color LEDs is graphene. From solar cells to semiconductors, graphene has made some achievements as an emerging material, but LED lamps made with this material have not achieved color adjustment until this time. Researchers will make this a reality.

In the conventional display or lighting technology, the existing LED device represents color or synthetic white light by adjusting the brightness of the three primary color light emitting units of fixed red, green, and blue. This breakthrough research achievement, while achieving color fidelity, can also significantly reduce the number of light-emitting units in the display device, thereby greatly optimizing the circuit and reducing power consumption.

According to a recent report from the news network of Tsinghua University, this new type of LED breaks through the color synthesis method of existing display devices and is expected to have a revolutionary impact on display screens, lighting fixtures and communication technologies. As the color of light changes with specific chemicals, such devices may also be used to prepare special sensors. The reviewers commented: "This work is expected to open up new research directions in the field of light-emitting devices." "This work is exciting and influential."

The research results were published online in Nature Communications. Wang Xiaomu, a postdoctoral fellow at Yale University, and Tian Hao, a doctoral graduate in microelectronics and electronics at Tsinghua University, are the co-first authors of the thesis. (Reporter Fang Linlin)

Product Introduction:

ESD ABS Sheet is a novel copolymer with uniform and stable electrical resistance.ESD ABS Sheet has excellent mechanical properties of toughness, hardness and stiffness.

Product Details:

Product

Thickness(mm)

Size(mm)

Color

Density(g/cm³)

ESD Abs Sheet

8-50

610*1220

Black

1.12

Advantages:

1.Wear resistance and with excellent resistance to creep, High mechanical strength, High rigidity and hardness 
2.Good flow properties, Non-absorbent, High mechanical strength, Excellent processing performance, No deformation after processing

Applications:

Scope of application: Semiconductor, LCD, Electronic equipments, Industrial machinery, Fixture equipments etc. 
Application: Electronic equipments installment, Fixture, Guide rail, Pallet, Liner, Scaleboard, vehicle wheel, Idler wheel etc.


ESD ABS Sheet

ESD ABS Sheet,Black Antistatic ABS Sheet,Antistatic ABS Board,Black ESD ABS Sheet

Shenzhen Anheda Plastic Products Co.,Ltd , https://www.ahdplastic.com

Posted on