Home is not only a place to rest, but also a harbor where our hearts are docked. Weary birds return to forests, fishes fly shallowly, and leaves fall back to the roots. This is a longing for home and a destination for life. Home style, furniture can best show the owner's taste. The type, function, design style, and craft of furniture all reflect a lifestyle. So what furniture is good? What kind of furniture is good for buying ? Today, the furniture network Xiaobian will take you to find out what material furniture is good . Let's take a look.

什么材质家具好

What material furniture is good

1, particle board

It is a man-made board that is made by pulverizing the residues of wood processing, wood chips, etc. into pellets, drying, mixing with rubber, hardener, and water repellent, and pressing them at a certain temperature. Because its profile resembles a honeycomb, it is called particle board.

Advantages: The internal cross-stitch structure of the particles, so the nail holding power is good, the lateral bearing capacity is good, the cut price is lower than the MDF, formaldehyde content is higher than the MDF, the price is relatively cheaper. According to the difference between the imports of imported finishes and domestic and thickness, each price ranges from 60 to 160 yuan.)

Disadvantages: Due to the fact that the method of manufacture is easy, the quality varies greatly, and it is not easy to distinguish. The flexural and tensile properties are poor, and the density is loose and loose.

2, MDF

This kind of man-made board is made of wood fiber or other plant fiber as raw material, and the urea-formaldehyde resin or other suitable adhesive is applied at a high temperature and high pressure to form a high density and is called a density board. Made of a density of 0.5 ~ 0.88g/cm3 called MDF. Density below 0.5 is generally referred to as fiberboard, and higher than 0.88 is called high density board.

Advantages: good physical properties, uniform materials, mechanical properties close to wood, there is no dehydration, so it will not be moisture deformation. Some surfaces are decorated with a tri-hydrin-based ammonia varnish that is moisture-proof, antiseptic, wear-resistant, and resistant to high temperatures, and does not require post-processing. Formaldehyde is low.

Disadvantages: high processing accuracy and process requirements; poor nail holding power; not suitable for processing at the decoration site; higher cost according to the veneer of imports and domestic and thickness differences, each price from 80 to 200 yuan.

3, the difference between particleboard and MDF

The raw material of the planer board is not completely crushed into fibers, but is crushed into granules, which are generally called wood shavings, and then glued together, and the density board completely smashes the wood raw materials into fibers. Joined by glue.

Particleboard density and medium density fiberboard are relatively close, but because the particleboard is formed by adding shavings to the adhesive, its density is not uniform, and the middle is low and both ends are high.

家具什么材质好

4, blockboard

Commonly known as Daxin board, it is a kind of special sandwich plywood, which is made up of wood strips with the same thickness and different length and arranged in close splicing. Daxinban has poor vertical bending compressive strength, but it has high transverse bending resistance.

V panel furniture is classified according to the surface decoration.

At present, the typical decorative materials on the market are veneer, decorative paper, impregnated paper, PVC and the like.

5, paste wood veneer

Sticking solid wood veneer is the most common decoration method in the current furniture market, and it is suitable for decoration of various grades of furniture. High-grade furniture adopts the veneer of precious tree species, while ordinary furniture uses the veneer of general tree species, and the core materials mainly include medium-density board, particle board, blockboard, and multi-layer plywood. With the development of science and technology, the thickness of veneer has also changed from the past 1mm to 0.2mm or even thinner. The appearance of solid wood veneer furniture is not much different from solid wood furniture in terms of appearance, but the price is relatively cheaper and the design is more fashionable and exaggerated. As the production of solid wood veneer uses precious tree species such as white oak and cherry wood, combined with advanced technology and craftsmanship, the intuitive effect is even better than that of ordinary solid wood furniture. It is natural and real.

6, paste wood paper

Wood grain paper is mainly a variety of imitation wood wood grain decorative paper, for the decoration of the paper after the need to repaint the board. Because the decorative paper is relatively thin and has relatively poor filling properties, the substrate surface roughness is required to be relatively small. Handmade sticker craftsmanship is often used in panel furniture, especially for mosaics and complex surfaces. The well-crafted sticker furniture is comparable in price to the veneer furniture.

The difference between the sticker surface and veneer veneer: veneer veneer has natural frugal, color and texture changes, and then there is touch with the hand, feel different. Because the veneer has a certain thickness, when it is accumulated, it encounters two adjacent interfaces, and usually does not turn. Instead, each paste is fast, so the wood grain of the two interfaces should not usually be connected. The veneer veneer, even imported high-grade paper, can be even counterfeited, but it is different from the natural veneer, which is more false. Sticker furniture is prone to flaws at the corners. In addition, due to the small thickness of the woodgrain paper, it will be directly wrapped in the interface between the two planes, causing the wood grain of the two interfaces to be connected.

什么材质家具好

7, other flat decoration

Directly printed wood grain refers to a decorative method of directly printing wood grain on a substrate and then painting. Its outstanding feature is its low cost compared to decorative paper, and it is easy to implement assembly line operations. The direct-printing wood grain technology requires the substrate to be smooth and flat. Generally, full-scraping putty is used to achieve this. The quality of direct-printing wood-grain technology mainly depends on the adhesion between the putty and its material, ink and putty, and primer. The surface quality also affects the printing quality and surface paint quality.

These are good for what material on specific presentation furnishings, furniture, in fact, each material has its own advantages and disadvantages, mainly to see everyone's budget and needs, the use of factors places, through specific description above, I hope for your future It is helpful to choose what kind of furniture is good for the furniture . For more furniture knowledge, please pay attention to the GO Home Information Channel.

Types Available: Conventional standard plugs and non-rotating plugs are available;

Standard: API

Specifications: 4 1/2''---20''. More special sizes or combination are available as requested.

Material: Rubbers and Phenolic Resins.

Top Plugs:
The top Cementing Plug is designed to exert continuous pressure on the casing wall. The core is made of special materials such as aluminium or phenolic depending on the application and well conditions. The tapered base fits the cavity of the bottom plug initiating a positive seal. A solid rubber top plug is also available. 


Bottom Plugs
Like the Top Cementing Plug, the fins and tail section provide positive wiping action. Fins also serve as a seal while cementing. The core of the bottom plug also made of special materials such as Aluminium or Phenolic depending on the application and well conditions. A rubber diaphragm at the top of bottom plugs ruptures after the plug is seated allowing cement to flow through.

Cementing Plug

Bottom Cement Plug and Top Cement Plug,Cement rubber plug

Puyang Junhong Rubber Co., Ltd. , https://www.pyjhxs.com

Posted on